ZORzB T-Brida s -1 16-25/4-25
19,18 lei
+0,19 lei înapoiSuma de cashback este aproximativă. Suma finală va fi vizibilă la finalizarea achiziției pe site-ul vânzătorului.Preț stabilneschimbat din 30 sept.
30 sept.azi
Descriere
ZORZB series clamps are intended for use with neutral SSIC conductors with solidly earthed neutral as well as for arranging branching lines going off the phase wires at low humidity objects. They also can be applied in the places where direct water spill onto the clamp is excluded. ZORZB are designed for various number of branched conductors (marked with a number following the clamp abbreviation).
Letter "S" shows whether the bolt head is of breakaway type or not. A series of numbers going before and after "/" sign indicates the main and branched cables size. Allow for the repeated connection and disconnection of the subscriber wires without removing the clip from the main wire.
Nominal voltage: 1000 Nominal cross section transition: 16...25 Nominal cross section branch: 4...25 Type of connection: EV004362 Ambient temperature: -45...55 Nominal clamp current: 80 Moment of screw head failure during SIP installation: 14,5 Length of wire end insulation: 24 Width: 25 Height: 95.0 Weight: 0,057 : 16...25 : 4...25
Caracteristici
Cum primești cashback-ul
Cumperi prin YolozApeși „Cumpără” și finalizezi comanda pe Materiale Electrice.
Confirmat în ~45 de zileDupă ce trece perioada de retur a magazinului.
Materiale Electrice1% înapoiZORzB T-Brida s -1 16-25/4-25
19,18 lei
+0,19 lei înapoiSuma de cashback este aproximativă. Suma finală va fi vizibilă la finalizarea achiziției pe site-ul vânzătorului.Preț stabilneschimbat din 30 sept.
30 sept.azi
19,18 lei+0,19 lei înapoi
Descriere
ZORZB series clamps are intended for use with neutral SSIC conductors with solidly earthed neutral as well as for arranging branching lines going off the phase wires at low humidity objects. They also can be applied in the places where direct water spill onto the clamp is excluded. ZORZB are designed for various number of branched conductors (marked with a number following the clamp abbreviation).
Letter "S" shows whether the bolt head is of breakaway type or not. A series of numbers going before and after "/" sign indicates the main and branched cables size. Allow for the repeated connection and disconnection of the subscriber wires without removing the clip from the main wire.
Nominal voltage: 1000 Nominal cross section transition: 16...25 Nominal cross section branch: 4...25 Type of connection: EV004362 Ambient temperature: -45...55 Nominal clamp current: 80 Moment of screw head failure during SIP installation: 14,5 Length of wire end insulation: 24 Width: 25 Height: 95.0 Weight: 0,057 : 16...25 : 4...25