Pini with bolt NS -400 35 kW

The bolted terminals and sleeves, like compression terminals and sleeves, are designed for termination of conductors. However they can be fixed without use of expensive equipment. A torque wrench is sufficient. Moreover, their unquestionable advantage is a capability to be used for termination and connection of both copper and aluminum conductors. All products have conductivity according to GOST 17441-84.At the tips of BL (bolted lug) break bolts are located in different planes at an angle of 180° to each other. In comparison with the location of the bolts on one side, the clamping of the cable core on different sides provides a more secure fixation of the conductor and increases the spot of electrical contact. Depending on the cross section of the vein, the number of bolts varies from 5 to 10. All bolted terminals and connectors are marked indicating the allowable cable cross sections and manufacturer's code.Weight: 0,404 Height: 45.5 Length: 133.5 Surface protection: EV000899 Number of screws: 3 Material: IEK_V0000333 Bolt dimension metric (M..): 20х1,5 Moment of screw head failure during installation of line cabs: 62,2 Nominal cross section: 400 Operating voltage: 35000 Ambient temperature: -60...+80 Cross section form: EV010032 Colour insulation: EV000154 Width: 42.0