BUS/KNX presence sensor - ceiling mounted -IP20 -360° IR + high density lens -8 m
954,23 lei
+9,54 lei înapoiSuma de cashback este aproximativă. Suma finală va fi vizibilă la finalizarea achiziției pe site-ul vânzătorului.Preț stabilneschimbat din 6 oct.
6 oct.azi
Descriere
Caracteristici tehnice Special presence sensors for work areas Suitable for meeting rooms, classrooms, open areas, etc. Ceiling mounted 360° passive infrared detection with high density lens range 8 m IP 20 Consum 0.5 W Optimum distance between two sensors: 6 m Fixes directly in suspended ceiling with springs (supplied) or is installed in a 50 mm deep Batibox Surface mounted on ceiling using accessory Cat. No 0 488 75 Connection by KNX red/black connector Caracteristici generale Lighting Management - BUS/KNX sensors Constantly check for presence and light levels, switching OFF as soon as the natural light level is sufficient Switch ON and OFF automatically Accurate set-up on site with configuration device Connected directly to BUS/KNX cable (supplied with tap-off connector) The detector must be programmed using ETS software
Caracteristici
Cum primești cashback-ul
Cumperi prin YolozApeși „Cumpără” și finalizezi comanda pe Materiale Electrice.
Confirmat în până la 60 de zileDupă ce trece perioada de retur a magazinului.
Materiale Electrice1% înapoiBUS/KNX presence sensor - ceiling mounted -IP20 -360° IR + high density lens -8 m
954,23 lei
+9,54 lei înapoiSuma de cashback este aproximativă. Suma finală va fi vizibilă la finalizarea achiziției pe site-ul vânzătorului.Preț stabilneschimbat din 6 oct.
6 oct.azi
954,23 lei+9,54 lei înapoi
Descriere
Caracteristici tehnice Special presence sensors for work areas Suitable for meeting rooms, classrooms, open areas, etc. Ceiling mounted 360° passive infrared detection with high density lens range 8 m IP 20 Consum 0.5 W Optimum distance between two sensors: 6 m Fixes directly in suspended ceiling with springs (supplied) or is installed in a 50 mm deep Batibox Surface mounted on ceiling using accessory Cat. No 0 488 75 Connection by KNX red/black connector Caracteristici generale Lighting Management - BUS/KNX sensors Constantly check for presence and light levels, switching OFF as soon as the natural light level is sufficient Switch ON and OFF automatically Accurate set-up on site with configuration device Connected directly to BUS/KNX cable (supplied with tap-off connector) The detector must be programmed using ETS software